Electrosmog is a term applied to the background, invisible, electromagnetic radiation resulting from the use of both wireless technology and mains electricity.
The RF Electrosmog sensor is a broad bandwidth RF (Radio Frequency) detector, which can detect over the frequency range 50 MHz to 3 GHz. This makes it suitable for measuring RF that comes from Bluetooth, Wi-Fi, microwave ovens and mobile phones.
The detector does not distinguish the frequency of the RF source but some discrimination of frequency can be achieved with design of the antenna. The sensor is fitted with a female F-type connector (the type used for cable and satellite aerial connections), this allows the user to make and attach antennae that are more specifically tuned to a particular frequency.
Supplied with the sensor is a 31 mm antenna, plus a 0.5 metre length of coaxial cable and 2 screw on F-connectors for making your own.
The RF Electrosmog Sensor can be used to investigate a number of scientific experiments such as:
All our sensors are supplied with 5 years warranty and lifetime
For customers outside of the UK, please contact Data Harvest or an overseas distributor within your country.
Product |
---|
All available downloadable product manuals and firmware for the RF Electrosmog Sensor
Specification
Ranges | 3, dBm, V/m, % |
---|---|
dBm |
60 to 0 dBm |
V/m | 0 to 6 V/m |
% | 0 to 100% |
What's in the box
1x RF Electrosmog Sensor |
1x Antenna (ANT1) cut to 31mm, ¼ wavelength of 1.8 GHz (mobile phone frequency) |
1x 0.5 metre length of coaxial cable |
2x Screw on F - connectors |